 |
|
|
 |
Squeeze Products |
 |
 |
Main Characteristics of Squeeze Casting Method |
|
Low-speed,
longitudinal casting method
= Less than 1cc remaining gas in 100g (Average
DC: more than 10cc)
Directional
clotting
= T-6 Heat treating, weldable
Squeeze
casting (injection pressure IT)
=
High-pressure components, can be used in
high-intensity components |
|
Example of Products |
|
 |
 |
 |
| Torque rod |
Air-Compressor parts |
Oil pressure valve parts |
 |
 |
 |
| Torque rod |
Brake parts |
Brake parts |
|
HVSC |
|
The same type of horizontal pressing as used in
the traditional die-casting machine is used for mold clamping.
Machine to eject from bottom part is used for ejection.
It's the best method for heat retention of the solution and air
elimination. |
|
|
Inclined Shaft Docking Injection System |
|
| The inclined shaft docking system minimizes the
amount of time needed from injection to ejection, makes it possible
to retain heat, and utilizes super low-speed ejection. |
|
|
Cavity Comparison |
|
| Difference in the cavities is seen as well as a
difference in the amount of remaining gas. |
|
|
Temperature Distribution of
the Solution in Sleeve |
|
| As vertical sleeves are superior to horizontal
sleeves in terms of liquid heat retention, vertical sleeves can
fill in the metal mold with solution at an extremely slow rate. |
|
|
